IEI Integration UPC-12A_GM45 v2.10 User Manual
Page 47
Advertising
UPC-12A/GM45 Panel PC
Page 35
Figure 4-2: HDD/Battery Access Panel Retention Screws
Step 2:
Locate the HDD slot
in the UPC-12A/GM45.
Step 3:
Remove the HDD bracket.
The HDD bracket is secured to the aluminum
chassis by four retention screws (
538H538H538H538H538H538H538H540H
Figure 4-3
). To remove the HDD bracket,
please remove the four retention screws.
Figure 4-3: HDD Bracket Retention Screws
Step 4:
Place one 2.5” SATA HDD onto the HDD bracket
as shown in
539H539H539H539H539H539H539H541H
Figure 4-4
.
Connect the HDD to the SATA cable connector.
Advertising