IEI Integration UPC-12A_GM45 v2.10 User Manual
Page 58
UPC-12A/GM45 Panel PC
Page 46
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
561H561H561H561H561H561H561H563H
Figure 4-14
).
Figure 4-14: Wall-mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the monitor and tighten until the screw
shank is secured against the rear panel (
562H562H562H562H562H562H562H564H
Figure 4-15
).
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (
563H563H563H563H563H563H563H565H
Figure 4-15
).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.