IEI Integration UPC-12A_GM45 v2.10 User Manual

Page 94

Advertising
background image

UPC-12A/GM45 Panel PC

Page 82

Î

Enabled

Remote access configuration options shown below

appear:

Serial Port Number

Serial Port Mode

Redirection after BIOS POST

Terminal

Type

These configuration options are discussed below.

Î

Serial Port Number [COM1]

Use the Serial Port Number option allows to select the serial port used for remote

access.

Î

COM1 D

EFAULT

System is remotely accessed through COM1

Î

COM2

System is remotely accessed through COM2

Î

COM3

System is remotely accessed through COM3

Î

COM4

System is remotely accessed through COM4

NOTE

: Make sure the selected COM port is enabled through the Super I/O configuration

menu.

Î

Base Address, IRQ [3F8h,4]

The Base Address, IRQ option cannot be configured and only shows the interrupt

address of the serial port listed above.

Î

Serial Port Mode [115200 8,n,1]

Use the Serial Port Mode option to select baud rate through which the console redirection

is made. The following configuration options are available

ƒ

115200

8,n,1 D

EFAULT

ƒ

57600

8,n,1

ƒ

38400

8,n,1

ƒ

19200

8,n,1

Advertising