12 sfp fiber module installation (optional), Iber, Odule – IEI Integration PPC-51xxA-H61 User Manual
Page 66: Nstallation, Ptional, Figure 3-31: stand mounting retention screw holes
PPC-51xxA-H61 Panel PC
Page 51
Step 1:
Locate the screw holes on the rear of the PPC-51xxA-H61. This is where the
bracket will be attached.
Figure 3-31: Stand Mounting Retention Screw Holes
Step 2:
Align the bracket with the screw holes.
Step 3:
To secure the bracket to the PPC-51xxA-H61, insert the retention screws into
the screw holes and tighten them.
S
te
p
0
:
3.12 SFP Fiber Module Installation (Optional)
To install the SFP fiber module, please follow the steps below:
Step 1:
Locate the SFP fiber connectors. The locations of the connectors are shown in
Figure 1-5
and Figure 1-6.
Step 2:
Align the SFP fiber module with one of the SFP fiber connectors on the
PPC-51xxA-H61 (
7
Figure 3-32
).
Step 3:
Once aligned, slide the SFP module into place (
7
Figure 3-32
).