IEI Integration PPC-51xxA-H61 - Manual (Page 95)

PPC-51xxA-H61 Panel PC
Page 80
5.3.4 SATA Configuration
Use the SATA Configuration menu (
8
BIOS Menu 6 ) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Controller(s)
[Enabled]
SATA Mode Selection [IDE]
SATA1 Port Empty
SATA2 Port Empty
SATA3 Port Empty
SATA4 Port Empty
Enable or disable SATA
Device.
---------------------
ÆÅ: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 6: SATA Configuration
Î SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to configure the SATA controller(s).
Î
Enabled D EFAULT
Enables the on-board SATA controller(s).
Î
Disabled Disables the on-board SATA controller(s).
Î SATA Mode Selection [IDE]
Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.
Î
IDE D EFAULT
Configures SATA devices as normal IDE device.
Î
AHCI The SATA drive connected to the nth SATA drive port is
specified as a normal SATA drive.