IEI Integration PPC-51xxA-H61 - Manual (Page 83)

PPC-51xxA-H61 Panel PC
Page 68
Step 4: Unfasten the screws on the inside panel (
8
Figure 4-8 ).
Figure 4-8: PSU Bottom Panel Retention Screws
Step 5: Remove the retention screws that connect the PSU bracket to the chassis
(
8
Figure 4-9 ).
Figure 4-9: PSU Bottom Panel Screws
Step 6: Remove the retention screws that connect the PSU to the PSU bracket. Step 0:
4.6.2 Install the New PSU
Installation is done in the reverse order to removal. To install a new PSU module, please
follow the steps below.
Step 1: Attach the PSU bracket to the PSU module with the previously removed
retention screws.
Step 2: Insert the PSU module and bracket assembly into the chassis and attach the
PSU bracket to the chassis with the previously removed retention screws.