IEI Integration PPC-5152-D525 v1.02 - Manual (Page 39)

PPC-5152-D525 Falt-bezel Panel PC
Page 25
NOTE:
The pin locations of the SFP connector 2 are opposite to the SFP
connector 1. Please rotate the SFP module to a proper position to
install the SFP module into the SFP connector 2.
3.7 HDD Installation
The PPC-5152-D525 has one internal HDD bay. To install the HDD, follow the instructions
below.
Step 1: Remove a total of ten retention screws from the back cover, eight on the rear of
the frame and two on the rear panel (
6
Figure 3-7 ).
Figure 3-7: Rear Panel Retention Screws
Step 2: Remove the four HDD bracket retention screws and unplug the SATA cable and
the SATA power cable from the motherboard. See
6
Figure 3-8 .