IEI Integration PPC-5152-D525 v1.02 - Manual (Page 50)

PPC-5152-D525 Falt-bezel Panel PC
Page 36
Figure 3-19: Tighten the Panel Mounting Clamp Screws
3.10.3 Rack/Cabinet Mounting
The PPC-5152-D525 panel PC can be installed into a rack or cabinet. The installation
procedures are similar to the panel mounting installation. To do this, please follow the
steps below:
NOTE:
When purchasing the cabinet/rack installation bracket, make sure it is
compatible with both the PPC-5152-D525 flat panel PC and the
rack/cabinet into which the PPC-5152-D525 is installed.
Step 1: Slide the rear of the PPC-5152-D525 panel PC through the rack/cabinet bracket
until the aluminum frame is flush against the front of the bracket (Figure 3-20).