Figure 3-16: arm mounting retention screw holes – IEI Integration PPC-5152-D525 v1.02 User Manual
Page 47
PPC-5152-D525 Falt-bezel Panel PC
Page 33
NOTE:
Make sure the arm supports standard VESA mounting. The
PPC-5152-D525 uses a VESA mounting to attach to the arm.
Step 1:
The arm is purchased separately. Follow the instructions in the arm's user
manual to securely attach the arm to the wall.
Step 2:
Once the mounting arm has been firmly attached to the surface, lift the panel PC
onto the interface pad of the mounting arm.
Step 3:
Align the retention screw holes on the mounting arm interface with those in the
panel PC. The arm mount retention screw holes are shown in Figure 3-16.
Figure 3-16: Arm Mounting Retention Screw Holes
Step 4:
Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the flat panel PC.
Step 0: