Figure 3-8: hdd bracket retention screws, Figure 3-9: hdd installation – IEI Integration PPC-5152-D525 v1.02 User Manual
Page 40
Advertising
PPC-5152-D525 Falt-bezel Panel PC
Page 26
Figure 3-8: HDD Bracket Retention Screws
Step 3:
Lift the HDD bracket out of the PPC-5152-D525.
Step 4:
Remove the SATA connector from the bracket by removing the two retention
screws on the bottom of the bracket.
Step 5:
Connect the HDD to the SATA connector first, then place the HDD onto the
bracket. Secure the SATA connector with the HDD bracket by two previously
removed screws.
Step 6:
Secure the HDD with the HDD bracket by four retention screws (
Figure 3-9: HDD Installation
Advertising