IEI Integration PPC-5152-D525 v1.02 - Manual (Page 42)

PPC-5152-D525 Falt-bezel Panel PC
Page 28
3.8 PCI Expansion Card Installation
CAUTION:
The maximum dimensions of the expansion card should be 200 mm in
length, 100 mm in width and 20 mm in height. The width of the I/O panel
should be no more than 73.8 mm. The diagram below shows the
dimensions of the expansion slot on the bottom panel of the
PPC-5152-D525.
To install a PCI expansion card, please do the following.
Step 1: Remove the rear cover. See Section
6
3.7 Step 1 .
Step 2: Remove the expansion slot cover. The expansion slot cover is secured to the
system with a single retention screw. Remove the screw.