IEI Integration AFL-LX-Series v2.01 - Manual (Page 51)

AFOLUX LX Series Flat Panel PC
Page 51
Step 2: Once the mounting arm has been firmly attached to the surface, lift the flat panel
PC onto the interface pad of the mounting arm.
Step 3: Align the retention screw holes on the mounting arm interface with those in the
flat panel PC. The AFL-07A-LX/ AFL-07A-LX arm mount retention screw holes
are shown in
4
Figure 3-18 and the AFL-10A-LX/AFL-12A-LX are shown in
4
Figure 3-19 .
Figure 3-18: AFL-07A-LX/AFL-08AH-LX Arm Mounting Retention Screw
Holes
Figure 3-19: AFL-10A-LX/AFL-12A-LX Arm Mounting Retention Screw Holes