IEI Integration AFL-LX-Series v2.01 - Manual (Page 57)

AFOLUX LX Series Flat Panel PC
Page 57
3.10 Power-up the System
WARNING:
Make sure a power supply with the correct input voltage is being fed
into the system. Incorrect voltages applied to the system may cause
damage to the internal electronic components and may also cause
injury to the user.
To power-on the AFL LX Series please follow the steps below:
Step 1: Connect the power adapter to the power connector. Then, connect the power
adapter to the power source.
Step 2: Push the power button. See
74
Figure 3-26
Step 3: Once turned on, the power LED on the front panel should light on. Step 0:
Figure 3-26: Power Connector and Power Button