IEI Integration AFL-LX-Series v2.01 - Manual (Page 65)

AFOLUX LX Series Flat Panel PC
Page 65
Figure 4-12: SO-DIMM Socket Location
Step 4: Remove the DDR memory module by pulling both the spring retainer clips
outward from the socket.
Step 5: Grasp the DDR memory module by the edges and carefully pull it out of the
socket.
Step 6: Install the new DDR memory module by pushing it into the socket at an angle
(
4
Figure 4-13 ).
Step 7: Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR memory module down (
4
Figure 4-13 ).
Step 8: Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR memory module in the socket. Step 0:
Figure 4-13: DDR SO-DIMM Module Installation