IEI Integration AFL2-12A-HM65 v1.00 - Manual (Page 34)

AFL2-12A-HM65 Series Panel PC
Page 34
2.7 System Power
2.7.1 Power Mode
The system can be run in the AT power mode or the ATX power mode. Both these power
modes are described below.
2.7.1.1 ATX Power Mode (Default)
With the ATX mode selected, the AFL2-12A-HM65 panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch
in standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
2.7.1.2 AT Power Mode
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL2-12A-HM65 panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
 ATM
 Self-service kiosk
 Plant environment monitoring system
 Factory automation platform
 Manufacturing shop flow
2.7.2 Power Adapter
The system is shipped with a 100 V to 240 V AC power adapter that has a maximum
power output of 65 W. The power adapter has a 19 V DC output connector.