IEI Integration AFL2-12A-HM65 v1.00 - Manual (Page 57)

AFL2-12A-HM65 Series Panel PC
Page 57
CN Location: See Figure 4-17
CN Pinouts: See Table 4-1
A 10/100/1000 Mb/s connection can be made to a Local Area Network.
Pin Description Pin Description
1 NDCD3 5 NTXD3
2 NDSR3 6 NCTS3
3 NRXD3 7 NDTR3
4 NRTS3 8 NRI3
Table 4-1: Ethernet Connector Pinouts
Figure 4-17: Ethernet Connector
Follow the steps below to connect a serial device to the RJ-45 serial port connector of the
AFL2-12A-HM65 panel PC.
Step 1: Locate the RJ-45 serial port. The location of the RJ-45 serial port is shown in
Chapter 2.
Step 2: Connect the RJ-45 to COM port cable to the panel PC. Insert the RJ-45
connector end of cable into the RJ-45 serial port. See Figure 4-18.
Step 3: Connect the serial device. Connect a serial device to the DB-9 connector end
of the cable. See Figure 4-18.