IEI Integration IOVU-752S - Manual (Page 21)

IOVU-752S Panel PC
Page 14
3.2 SD Card Installation
The IOVU-752S supports an SD card. Follow the steps below to install an SD card.
Step 1: Remove the rear panel by removing the 10 retention screws from the rear panel
(Figure 3-1).
Figure 3-1: Rear Panel Retention Screws
Step 2: Locate the SD card slot on the motherboard (Figure 3-2).
Step 3: Slide the SD card into the slot (Figure 3-2).
Figure 3-2: SD Card Installation
Step 4: Reinstall the rear panel.