IEI Integration IOVU-752S - Manual (Page 23)

IOVU-752S Panel PC
Page 16
3.3.1.2 9 V~30 V DC Terminal Block
The power terminal block connects to a 9 V~30 V DC power source.
CN Label: 9-30V DC
CN Type: Terminal block
CN Location: See Figure 3-3
CN Pinouts: See Table 3-2 and Figure 3-4
Pin Description
1 9 V~30 V DC Power in
2 GND
Table 3-2: 9 V~30 V Power Connector Pinouts
Figure 3-4: Power Terminal Block
3.3.2 Ethernet Connector
There is one external RJ-45 LAN connector. The RJ-45 connectors enable connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
Step 1: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the IOVU-752S. See Figure 3-5.