IEI Integration IOVU-752S - Manual (Page 28)

IOVU-752S Panel PC
Page 21
Figure 3-9: Serial Device Connector
Step 2: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
3.3.4 USB Connectors
The external USB Series "A" receptacle connector provides easier and quicker access to
external USB devices. Follow the steps below to connect USB devices to the IOVU-752S.
Step 1: Insert a USB Series "A" plug . Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
Figure 3-10 .
Figure 3-10: USB Connector