IEI Integration PAC-1000G - Manual

PAC-1000G QIG IEI Technology Corp. Page 1
Quick Installation Guide
PAC-1000G
6-slot Wall-mount Chassis
Version: 1.0
ABOUT THE PAC-1000G
The 6-slot, heavy-duty steel PAC-1000G AT/ATX compact
wall-mount industrial chassis is designed to operate reliably in
industrial environments where it will be exposed to dust, wide
temperature variations, and shocks and vibrations, among other
things.
SPECIFICATIONS
Form Factor: 6-slot compact chassis
SBC Form Factor: Full-size, slot CPU cards
Construction: Plastic
Slots Number: 6-slot
Cooling: 1 x 8cm fan
Drive Bays:
o 1 x 5.25” Front accessible Optical drive bay
o 1 x 3.5” Front accessible FDD (floppy disk drive) or
HDD (hard disk drive)
o 1 x 3.5” Internal HDD (hard disk drive) drive bay
Dimensions (DxWxH):
o 421mm x 232mm x 176mm
Operating Temperature: 0~40°C
Relative Humidity: 5~95%
Vibration:
o 5 to 17Hz, 0.1” double amplitude displacement
o 17 to 640Hz, 1.5G acceleration peak to peak
Shock: 10G acceleration peak to peak
PACKING LIST
When you unpack the chassis, make sure the following items
have been shipped.
1 x Quick Installation Guide
1 x Power cord
2 x Wall-mount plates
3 x Long PCI/ISA card shock absorbers
3 x Short PCI/ISA card shock absorbers
1 x Screw set
2 x Clip nuts
DETAILS OF INCLUDED SCREWS
The attached screw set includes 5 types of screws. Screws
used for chassis installation are shown below.
1 2 3 4 5
Peripherals/Parts
Screw Label (refer
to the picture
above)
5.25” Optical Drives 5
3.5” FDD 5
3.5” HDD 1
2.5” HDD 4
Power Supply Unit 1
Wall-mount Bracket 3
3
Backplane
2
Table 1: Screws for Peripheral/Parts