Ramsey Winch H-930R DOW-LOK w/Air Shifter for Szummar User Manual
Page 16
19. Set the yoke (item #35) so that the screw heads (item #60) engage the external groove in the locking ring.
Push the clutch housing (item #20) onto the drum shaft and latch the shifter assembly in the engaged “IN” posi-
tion. Insert the (2) capscrews (item #55) and securely tighten.
Attach mounting angles (items #4 & 5) to winch assembly using (4) capscrews (item #56) and lockwashers
(item #77), at clutch housing, and (4) capscrews (item #57) and lockwashers (item #77) at gear housing.
Tighten capscrews to 500 ft-lbs (678 Nm) each.
20. Apply Loc-tite PST #567 thread sealer to the pipe
plug (item #93). Insert plug into bottom of gear
housing. Remove reducer and relief fitting (items
#87 and #92) from top of gear housing. Pour 4
pints of SAE 140 EP gear oil into hole. Apply Loc-
tite PST #567 thread sealer to the reducer and
relief fitting and replace. Oil level can be checked
at oil level plug.
60 65
35
20
55
56
57
77
77
4
77
77
5
56
56
14
93
92
87