Progressive International Electronics PIcon Console - Manual (Page 16)

PIcon Installation and Operation
Rev 2.0 June 2006 Page 12
Sales
Authorization must be made for a sale as either a Postpay, Preset Postpay, or Prepay sale.
Table: Sales Procedure, below, describes the sequence for completing each type of authorized
sale.
NOTE: An actual key action is indicated by <____>
Sale
Type
Procedure
Postpay
To authorize a dispenser for a Postpay/Fillup operation,
press the appropriate <PUMP #> key and then press the
red < AUTHO RIZE> key. To pay out the sale on the
console, press the <PUMP #> key. Press either <CASH
PAID> or <CREDIT PAID> key. To print a receipt, press
< PRINT> .
Preset
Postpay
To authorize a dispenser for a preset amount, press the
appropriate <PUMP #> key and then enter the preset
amount on the numeric keypad. Press the red
< AUTHO RIZE> key. To pay out the sale on the console,
press the < PUMP #> key. Press either < CASH PAID> or
< CREDIT PAID> key. To print a receipt, press <PRINT> .
(Note that the amount entered on the numeric keypad
appears on the display in the ENTERED VALUE field.)
Prepay
To authorize a dispenser for a prepay sale, press the
appropriate <PUMP #> key; then enter the amount paid
on the numeric keypad. (Note that the amount entered on
the numeric keypad appears on the display in the ENTERED
VALUE field.) Press method of payment, <CASH PAID> or
< CREDIT PAID> key; then the red <AUTHO RIZE> key.
Table: Sales Procedure by Authorization Type