Progressive International Electronics PIcon Console - Manual (Page 33)

PIcon Program & Report
Rev 2.0 June 2006 Page 29
Mode 12 — Clear Resettable Totals (Manager only)
Mode 12 is used to reset resettable totals by clearing them to zero. To enter this mode from
the M 0, mode number prompt, enter <12> on the keypad and press <ENTER>.
The display will show Press Clear. If you wish to zero all resettable totals, proceed by
pressing <CLEAR>.
Press any key to exit Mode 12.
Mode 50 — Select Language (Manager only)
To enter this mode from the M 0, mode number prompt, enter <50> on the keypad and press
<ENTER>. Press <SELECT> to scroll through the languages available. Language selection
pertains to printed reports and some display prompts.
Press <MNGR> to exit Mode 50.