Progressive International Electronics PIcon Console - Manual (Page 18)

PIcon Installation and Operation
Rev 2.0 June 2006 Page 14
Special Select Functions
Listed below are the five special operator select functions, along with the key sequences required
to execute them. Each key sequence begins with the operator pressing the <SELECT> key.
(Note that the display will prompt you to enter a function key for the appropriate mode.)
Select Function Key Sequence
Time/Date
Press <SELECT> again
Press <CLEAR> to exit
Turn Console O ff
Press <PUMP STOP>
Enter PIN Code
Press <ENTER> to turn back on
View Current Shift
Totals by Product
Press <ENTER>
Press <VOL> to see total volume
Press <CASH PAID> for cash total
Press <CREDIT PAID> for credit total
Press <ENTER> for next product
Print Current Shift
Report Press <PRINT>
Change Shift
Press <CHNG> (only after viewing the totals
or after report printing is completed)
Note: The Change Shift function may be
utilized only after the totals have been viewed
or printed and may be accessed only once
every hour.
Table: Select Key Functions
Select functions are accomplished by first pressing the <SELECT> key. The word Function
appears in the display, prompting the operator to enter the key for the desired function.