Progressive International Electronics PIcon Console - Manual (Page 29)

PIcon Program & Report
Rev 2.0 June 2006 Page 25
Mode 10 — Read Reports (Manager/Operator)
In Mode 10, totals reports may be generated and displayed. To enter this mode from the M 0,
mode number prompt, enter <10> on the keypad and press <ENTER>.
The display will show an R 0, prompting you to enter a report type code. From the following
reports, select the one you would like displayed.
1 Resettable Totals
2 Non-Resettable Totals
3 Shift 0 Totals (current shift)
4 Shift 1 Totals
5 Shift 2 Totals
6 Shift 3 Totals
7 Polled Dispenser Totals
Select the report number and enter it on the PIcon keypad; then press <ENTER>. The
beginning data for the report is shown in the display. Use the following keys to scroll
through the report.
<ENTER> Display next product totals
<VOL> Display the volume total
<CASH PAID> Display the cash total
<CREDIT PAID> Display the credit total
<MNGR> Exit Mode 10