Progressive International Electronics PIcon II Console - Manual (Page 10)

PIcon II Installation
Rev 1.0 January 2014 5
Quick Startup
This quick startup procedure lists the order and minimal programming steps for operation of the
PIcon II. For more detailed explanations or for programming of optional modes, refer to the
Programming Section of this manual.
1. Program Mode PGM 1 — Pump Type
Note: Pump Type must be selected before other programming can be completed.
2. Program Mode PGM 2 — Dispenser Setup Information
3. Program Mode PGM 3 — Product Information
Prior to performing Quick Startup, press <SELECT> twice and check to ensure that the date is
correct. If incorrect, change date as explained in Manager Mode Section, MGR 5 — Set Date
and Time. If date is correct, calculate restricted code by multiplying the current month, times the
day, plus the year. For example, if the date were December 10, 2000, the restricted code would
be calculated as follows:
12 X 10 + 2000 = 2120 Restricted access code would be 2120.