Progressive International Electronics PIcon II Console User Manual
Page 40
Advertising

PIcon II
Programming
Rev 1.0
January 2014
35
When global settings have been configured (or if global settings are not available), press
<PUMP 1> to begin configuration of individual fueling positions. Using the <A/B> key,
toggle among the choices for each option Press <ENTER> to advance to the next option.
When the first position is configured, press <PUMP 2> to configure the next dispenser.
Continue until all dispensers are configured.
To exit Program Mode 60, press the <MANAGER> key. PGM 0m the mode entry prompt,
will appear on the display. To return to operator mode, press the <MANAGER> key again.
Advertising