Progressive International Electronics PIcon II Console - Manual (Page 38)

PIcon II Programming
Rev 1.0 January 2014 33
To exit Program Mode 8, press the <MANAGER> key. PGM 0, the mode entry prompt, will
appear on the display. To return to operator mode, press the <MANAGER> key again.
Program Mode PGM 9 — Set Language (PIcon II default – English)
PGM 9 is used to select the language to appear on display and printed reports. To enter this
mode from the PGM 0 mode number prompt, press <9> on the numeric keypad and then
press <ENTER>. Use the <A/B> key to toggle among supported languages.
To exit Program Mode 9, press the <MANAGER> key. PGM 0, the mode entry prompt, will
appear on the display. To return to operator mode, press the <MANAGER> key again.
Program Mode PGM 10 — Stacked Sales (Yes/No) (PIcon II default — Yes)
Program Mode 10 enables or disables stacked sales. To enter this mode from the PGM 0
mode number prompt, press <10> on the numeric keypad and then press <ENTER>. Use the
<A/B> key to toggle between Yes and No.
To exit Program Mode 10, press the <MANAGER> key. PGM 0, the mode entry prompt,
will appear on the display. To return to operator mode, press the <MANAGER> key again.