Progressive International Electronics PIcon II Console - Manual (Page 21)

PIcon II Manager
Rev 1.0 January 2014 16
Manager Mode MGR 1 — Program Product Price
To enter this mode from the mode number prompt, MGR 0, enter <1> on the keypad and
press <ENTER>. Prices may be set for the following:
Cash PPU — To set the Cash PPU for a product, enter the desired PPU on the numeric
keypad and press the <CASH PAID> key. The three decimal places are assumed.
Credit PPU — To set the Credit PPU for a product, enter the desired PPU on the numeric
keypad and press the <CREDIT PAID> key. The three decimal places are assumed.
As the Cash and Credit PPUs are entered, numeric key errors may be erased by pressing the
<CLEAR> key . The value will appear in the display. Note: Both Cash and Credit prices
must be programmed for each product — even if prices are the same.
To exit Mode 1, press the <MANAGER> key. MGR 0, the mode entry prompt, will appear
on the display. To return to operator mode, press the <MANAGER> key again.
Manager Mode MGR 2 — Read Reports (Refer to Reports Section, Read Reports)
Manager Mode MGR 3 — Print Reports (Refer to Reports Section, Print Reports)
Manager Mode MGR 4 — Clear Resettable Totals
MGR 4 is used to reset resettable totals by clearing them to zero. To enter this mode from the
mode number prompt, MGR 0, enter <4> on the keypad and press <ENTER>.
The display will show Press CLEAR. To zero all resettable totals, proceed by pressing
<CLEAR>. To exit Mode 4, press the <MANAGER> key. MGR 0, the mode entry prompt,
will appear on the display. To return to operator mode, press the <MANAGER> key again.