Progressive International Electronics PIcon II Console - Manual (Page 33)

PIcon II Programming
Rev 1.0 January 2014 28
Program Mode PGM 1 — Pump Type
At the Program Mode prompt, PGM 0, press <1>, then press <ENTER> to choose dispenser.
Scroll through dispenser brands by pressing <SELECT> until correct dispenser brand name
appears.
Press <MANAGER> to exit this mode. A prompt will appear for the option of clearing
memory back to factory defaults. Press <CLEAR> to clear all totals or <MANAGER> to
decline this option and exit the mode. If a change has been made in the Pump Type, the
PIcon II will reset upon exiting.
Program Mode PGM 2 — Pump Configuration
In Program Mode 2, hose selection, product, service and slowdown amount are chosen for
each dispenser/fueling position controlled by the PIcon II. To initiate Dispenser Setup
Information Mode, after being prompted from PGM 0, the mode number prompt, enter <2>,
and then press <ENTER>. Now in Program Mode 2, dispenser programming may be
initiated by pressing the <Pump #_> key for the first dispenser/fueling position at the site
(usually Pump #1).