Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 19)

21
Installation
En
g
lish
Note : If you are designing the panel with a material other than sheet metal, ensure that
the material has sufficient strength.
Unit mm[in.]
Note : Note that the panel cut dimensions have been calculated with the display area, not
the panel cut (A or B), as the reference.
Attaching Installation
Brackets on the Top and
Bottom Surfaces of the
GP Unit
Attaching Installation
Brackets on the Sides of
the GP Unit
X1 Y1 X2 Y2
PFXGP4301TADR 43 (±0.15)
[1.69, (±0.01)] 69.5 (±0.15)
[2.74, (±0.01)] 85.6 (±0.15)
[3.37, (±0.01)] 43 (±0.15)
[1.69, (±0.01)]
PFXGP4401TADR 43 (±0.15)
[1.69, (±0.01)] 87.5 (±0.15)
[3.45, (±0.01)] 109.8 (±0.15)
[4.32, (±0.01)] 43 (±0.15)
[1.69, (±0.01)]
PFXGP4501TADR 75.5 (±0.15)
[2.97, (±0.01)] 108.55 (±0.15)
[4.27, (±0.01)] 137.65 (±0.15)
[5.42, (±0.01)] 75.5 (±0.15)
[2.97, (±0.01)]
PFXGP4601TADR 75.5 (±0.15)
[2.97, (±0.01)] 121.8 (±0.15)
[4.80, (±0.01)] 158.8 (±0.15)
[6.25, (±0.01)] 75.5 (±0.15)
[2.97, (±0.01)]