Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 37)

39
Installation
En
g
lish
NOTICE
BROKEN ENCLOSURE
• Attach the Overlay correctly with the installation.
• Do not reuse the Overlay removed once.
• Do not exert more than 0.8 N•m (7.1 lb-in) of torque when tightening the
installation screws.
• For use on a flat surface of a Type 1 Enclosure
• Attach correctly without a crevice between gaskets and between gasket
and the panel.
• Do not attach installation fastener in a different position from mounting
instruction.
Failure to follow these instructions can result in equipment damage.