Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 2)

4
Eng
lis
h
Overview
Package Contents
The following items are included in the package. Before using the GP unit,
please confirm that all items listed here are present:
1 GP unit: 1
2 DC power supply connector: 1
*1
3 USB cable clamp Type A: 1 set (1 clip and 1 tie)
4 Installation gasket: 1 set (8 per set)
5 Installation fasteners: 2 per set (attached to the top and bottom surfaces of
the GP unit)
6 Installation screws: 4 per set (attached to the top and bottom surfaces of
the GP unit)
7 GP4000 Series Rear Mount Model Installation Guide (this guide): 1
8 Warning/Caution Information: 1
This unit has been carefully packed, with special attention to quality.
However, should you find anything damaged or missing, please contact your
local GP unit distributor immediately.
*1 You can use the DC power connector for GP-4300/4400 series to supply
power to GP-4500/4600 series. However the reverse is not possible. You
cannot use the power connector for GP-4500/4600 series on GP-4300/
4400 series.
 
 
)RU
*36HULHV )RU
*36HULHV