Proface LT3300 - 5.7 All-in-One HMI" - Manual (Page 17)

LT3000 Series Hardware Manual
1-2
1.1 System Design
1.1.1 LT-3200 Series
The following diagram illustrates the standard range of items that can be connected to LT-3200 Series units.
‹ LT RUN Mode Peripherals
*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!”
(http://www.pro-face.com/otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu – [Connect to Support Site-
“Otasuke Pro!” (O)] command.
LT Interfaces
(1) USB Host Interface
(2) EX Module Interface
(3) DIO Interface
LT Unit
(1)
(2)
(3)
USB-Serial (RS-232C) Conversion Cable
CA6-USB232-01
USB-to-IEEE1284
Conversion Cable
(Commercial type)
USB Cable
FP-US00 or
commercial type
USB Front Cable
(CA5-USBEXT-01)
Bar-Code Reader *1
(Commercial type)
Printer *1
(Commercial type)
USB Memory Strage *1
(Commercial type)
USB Hub (Commercial type)
EX Module
(Up to two EX modules can be connected to the rear side of the LT-3201A.)
Various types of I/O equipment
Indicators, LEDs, sensors, switches, and so on
Bar-Code Reader *1
(Commercial type)