3 replacing the installation gasket, 3 replacing the installation gasket -4, Replacing the installation gasket – Proface LT3300 - 5.7 All-in-One HMI" User Manual
Page 91: 4 5.3 replacing the installation gasket
LT3000 Series Hardware Manual
5-4
5.3 Replacing the Installation Gasket
The installation gasket provides protection against dust and moisture.
Installation Gasket Attachment Procedure
(1) Place the LT on a flat, level surface facing the display face downwards.
(2) Remove the gasket from the LT.
(3) Attach the new gasket to the LT. Be sure to insert the gasket into the LT’s groove so that the gasket’s
groove sides are vertical.
(4) Check that the gasket is attached correctly to the LT.
• A gasket which has been used for a long period of time may have scratches or
dirt on it, and could have lost much of its water resistance. Be sure to change the
gasket at least once a year, or when scratches or dirt become visible.
• The LT unit installation gasket’s model number is as follows.
LT-3200 Series
ST400-WP01
LT-3300 Series
CA3-WPG6-01
LT Rear Face
Gasket Seam
Gasket
Installation
Groove
(LT-3300*)