Watlow 12LS Controller - Manual (Page 48)

4-15
Press ENTER to store the new alarm delay setting or press BACK to return to the SETUP GLOBAL PARAMETERS
main menu heading.
4.5.1.4 SETTING THE GLOBAL TIME BASE
This menu allows setting of the global ramp and soak time base to units of hours and minutes or minutes and seconds.
All time entries in ramp and soak profiles will assume the units of this setting. The default is hours and minutes.
|-----------------------------------------------------|
¦ NOTE: This prompt will appear only if the unit has ¦
¦the Ramp and Soak option installed. ¦
|-----------------------------------------------------|
The display will appear as :
|----------------|
¦ RAMP/SOAK TIME ¦
¦BASE? xxxx/xxx ¦
|----------------|
Press YES to select the menu or NO to advance to the next menu.
Press UP and DOWN to toggle selection between HOURS/MINS or MINS/SECS.
Press ENTER to store the new time base or press BACK to return to SETUP GLOBAL PARAMETERS main menu
heading.
4.5.1.5 KEYBOARD LOCK
This menu allows the front panel function keys
|-----| |-----| |-----|
¦CHNG ¦ ¦ MAN ¦ ¦RAMP ¦
¦ SP ¦ ¦AUTO ¦ ¦SOAK ¦
|-----| |-----| |-----|
to be disabled (pressing these keys will not cause any action). The default setting is OFF so that these keys are
activated. The display will appear as:
|----------------|
¦ KEYBOARD LOCK ¦
¦ STATUS ? xxx ¦
|----------------|
Press YES to select the menu or NO to advance to the next menu.
Press UP and DOWN to toggle the selection between OFF and ON.
Press ENTER to store the new panel lock status or press BACK to return to the SETUP GLOBAL PARAMETERS
main menu heading.