Watlow ANASCAN User Manual
Page 47
Advertising
SYSTEM SETUP
ANASCAN User’s Guide 39
NOTE
In order for the power failure recovery sequence to operate,
ANASCAN must be started automatically when the computer is
powered up. This is done using an AUTOEXEC.BAT file which
contains commands which the computer executes at power up. See
DOS operating manual for description of AUTOEXEC.BAT files.
The file should contain as its last commands:
1) a command to enter the disk directory containing ANASCAN.
2) a command to stated executing the ANASCAN program.
Advertising