Communications menu lockout, Diagnostics menu lockout, Calibration menu – Watlow Series 998 User Manual
Page 92: Com] [diag] [`cal, Factory-panel lockout
6.6
WATLOW Series 998 User’s Manual
Factory Menus, Chapter 6
Factory-Panel Lockout
Communications Menu Lockout
Select the lockout level for the Communications Menu. Set the lock-
out to no lockout [none], read only [read] or full lockout [FULL].
[COM] This prompt appears only if the controller is equipped with com-
munications hardware (99__- ____- _R__ or 99__- ____- _S__).
Default
↓
[none]
[read]
[FULL]
[COM]
[COM]
[COM]
Diagnostics Menu Lockout
Select the lockout level for the Diagnostics Menu. Set the lockout to no
lockout [none], read only [read] or full lockout [FULL].
[diAg] This prompt always appears.
Default
↓
[none]
[read]
[FULL]
[diAg]
[diAg]
[diAg]
Calibration Menu
Select the lockout level for the Calibration Menu. Set the lockout to no
lockout [none], read only [read] or full lockout [FULL].
[`CAL] This prompt always appears.
Default
↓
[none]
[read]
[FULL]
[`CAL]
[`CAL]
[`CAL]
[COM]
[diAg]
[`CAL]