Watlow Series PD - Manual (Page 169)

The Class, Instance, and Attribute to start Autotune in the PD follow:
- Class = 101
- Instance = 1
- Attribute = 44
In this example the above values would be loaded into the tags identified below in Hex as:
- Class = 65
- Instance = 1
- Attribute = 2c
The source length is set at 3 bytes above and will always be 3 bytes when performing this
operation (increasing or decreasing the assembly size). The last part of the configuration is
to identify the path to the PD. Click on the communications tab and then click the browse
button. Select the PD, and click OK. The configuration is now complete.
The O
ÆT Dynamic Assembly will be increased after enabling the MSG instruction below.
Figure 4.0c
Figure 4.0d
Figure 4.0e
167