Watlow Series PD - Manual (Page 39)

W a t l o w S e r i e s P D
■
37
■
C h a p t e r 7 C o n f i g u r a t i o n P a g e
Multiple PID Loop Configuration
The Multiple PID Loop Configuration page allows access to all of the PID sets for each loop available. You can
see and change all of the parameters on the Multiple PID Loop Configuration page, but only those that apply will
be relevant.
For example, you can set the Cool PID values even though the Series PD is set for heat PID control. Only pa-
rameters relating to heat PID values have any effect on the controller. If you change the Loop Action to Heat/Cool,
the cool PID values previously entered are used.
Note: Multiple PID Loop 2 Configuration appears on dual channel models only.
Note: You must click Submit to send the new values to the Series PD.
Figure 37 — Multiple PID Loop Configuration Web Page Example
Note: Red tag arrows and tag numbers are links to item descriptions. Click on a red tag arrow or number to go to a description of the item.