AMT Datasouth 7200 - Manual (Page 35)

7200
2-16 Operation Manual
Transfer ribbon winding direction
Lock
G. Remove the ribbon loader. Squeeze the
lock with your fingers to remove the
loader.
H. Turn the ribbon take-up core in the
direction of the arrow until the ink portion
of the transfer ribbon is seen. Then, turn it
at least 3 additional times.
Note!
Be careful of which direction you turn
the ribbon core. Only turn the core in
the direction indicated by the arrow!
I. Close the side cover (top right).
Note!
Make certain that both ribbon cores are
clicked on the pivots.