AMT Datasouth 7200 - Manual (Page 69)

7200
APPENDIX-4 Operation Manual
(2) Document specifications
(3) Detection
(4) Documents set
A.1.5 Encoding Specifications
(1) Magnetic encode method
(2) Track
(3) Recording density
(4) Coded character set
(5) Data check method
(6) Coercive force
(7) In case of encode error
(8) Magnetic stripe specifications
(9) Encoding area
A.1.6 Printing
(1) Printing method
(2) Printing area
(3) Printing color
(4) Dot-density
Refer to "Transfer Ribbon Printing" for the transfer ribbon structure.
A.1.4 Bins and Feeder
This ATB printer has 2 internal bins and a third external bin as standard. Each of them can
contain documents for printing. The specifications of each bin are as follows:
(1) Bins
Refer to the ATB Printer Document Specifications.
End detecting function available
Near-end detecting function not available
With or without a box; either available
F2F (Two frequency coherent phase recording)
4 tracks
210 BPI (All tracks)
6-bit code + 1 parity
Comparison check after written
325 ± 10%
The document with "VOID" printed is printed out.
Refer to the ATB Printer Document Specifications
Refer to Encoding Area figure in Maintenance manual
Direct line thermal (1 dot-line at a time)
Thermal transfer (available; 1 dot-line at a time)
Refer to Printing Area figure in Maintenance manual
Black
Horizontal: 203dpi (0.125mm/dot)
Vertical: 203dpi (0.125mm/dot)
B i n N o . S t a n d a r d I n t e r n a l C a p a c i t y D o c u m e n t T y p e s
1 ь ь ь ь 500
IATA Resolution
1720a, 1722c, 722c, 722d, 722e,
Continuous-fanfolds
2 ь ь ь ь 500
3 ь ь 1 0 0 0