AMT Datasouth 7200 - Manual (Page 41)

7200
3-2 Operation Manual
3.1 Cleaning the ATB Printer
This section explains the ATB printer components that need regular cleaning.
3.1.1 Cleaning the Printer Surface
Use a cloth moistened with water or a neutral detergent to wipe the ATB printer surface.
Squeeze or wring the cloth to remove excess water and leave the cloth damp rather than
dripping wet. Use a soft, dry cloth for the final wiping. Make certain the ATB printer surface
is completely dry!
Notes on Cleaning:
Turn the power off and unplug the power cable before starting any cleaning
procedure except when using the cleaning card!
Only use water or neutral detergents, or isopropyl alcohol as specified. Never use
harsh cleaning chemicals!