Yokogawa EJX115A User Manual
Page 49
<9. General Specifications>
9-3
IM 01C25K01-01E
Physical Specifications
Wetted Parts Materials
Diaphragm, Cover Flange, Process Connector,
Capsule Gasket, Vent/Drain Plug, Manifold,
Orifice, Spacer, and Orifice gasket
Non-wetted Parts Materials
Bolting
ASTM-B7 carbon steel, 316L SST stainless
steel, or ASTM grade 660 stainless steel
Housing
Low copper cast aluminum alloy with
polyurethane paint or ASTM CF-8M stainless
steel
Degrees of Protection
IP66/IP67, NEMA TYPE 4X
Cover O-rings
Buna-N, fluoro-rubber (option)
Nameplate and tag
316SST (including /N4 wired tag)
Fill Fluid
Silicone, Fluorinated oil (option)
Weight
[Installation code 7, 8, and 9 and measurement
span code M and H]
4.5 kg (9.9 lb) without integral indicator and
mounting bracket.
[Installation code 7, 8 and 9 and measurement
span code F]
5.4 kg (11.9 lb) without integral indicator and
mounting bracket.
Add 1.5 kg (3.3lb) for amplifier housing code 2.
Connections
Refer to “Model and Suffix Code.”
Process Connection of Cover Flange:
IEC61518