Yokogawa YFGW610 - Manual (Page 27)

<B4. Power, ground, and signal cable connection>
B4-1
IM 01W02D02-01EN
B4. Power, ground, and network cable
connection
This section explains the power, ground, and network cable connection to YFGW610.
B4.1 Connection Terminals and Communication
Interface
Connect cables as follows;
Power supply cable: to the spring terminals of YFGW610
Ground cable (with a ring-type crimp terminal): to the ground terminal by using the screw
Metal network cable conforming to the 100BASE-TX standard, terminated with an RJ-45 connec-
tor: to the field wireless backbone interface
Optical network cable conforming to the 100BASE-FX standard, terminated with an SC connec-
tor: to the optical network interface
FB0401
Optical network
interface
Power supply
connector
Field wireless
backbone interface
Figure B4-1 Connection terminals and communication interfaces