Yokogawa FieldMate - Manual (Page 22)

<3 PRM Synchronization Tool start>
3-13
IM 01R01A20-01E 8th Edition : May 31, 2013-00
 History
History messages can be included in the data transfer. When included, you can specify the
history message items you want to include.
030308E.ai
Figure3-8 Advance Configuration dialog box - History tab
TIP
PRM Synchronization Tool can include maintenance alarm messages from PRM but cannot acknowledge or
create new messages.
To select history messages:
1. Under Data Options, select the [History] check box. A check mark appears and the options
in the History tab are enabled.
The options in the tabs are only enabled after you select the corresponding Data Options
check box.
2. Select a date range by either entering the number of days, or by selecting specific dates
using the [From] and [To] buttons. The maximum number of days is 14.
3. Under Items Selection, select the messages you want to include.
4. Under Limit, specify the number of messages to include. The maximum is 1000 messages.
5. Click [OK] to apply and save the settings.
• Click [Cancel] to revert to the previous configuration settings.
• Click [Default] to use the Advanced configurations default settings.