2 operation preparation, Software operation condition, Operation preparation -1 – Yokogawa FieldMate User Manual
Page 7: Software operation condition -1, 2operation preparation
<2 Operation Preparation>
2-1
IM 01R01A20-01E
2
Operation Preparation
This chapter describes the operation preparation before starting PRM
Synchronization Tool.
Software operation condition
PRM R3.02 or later
FieldMate R1.03 or later
Since the new functionality support on PRM and FieldMate needs to be considered such as
new DD Menu for e-EDDL and Device Tag Extension Mode, the compatibility between different
versions of PRM and FieldMate is shown as below.
PRM R3.01 or earlier and FieldMate R1.02 or earlier are excluded because PRM/FieldMate
Synchronization function is not supported.
Table 2-1
Version compatibility between PRM and FieldMate
FieldMate
R1.03
R2.01.00
R2.01.10
R2.02/R2.03/R2.04
R2.05/R2.06
PRM R3.02 Full support
based on
FieldMate R1.03
specification *1
Limited
synchronization
support
*
2
Limited
synchronization
support
*
3
Limited
synchronization
support
*
3 *6
Limited
synchronization
support
*
3 *6 *7
R3.03
R3.04
Limited
synchronization
support
*
3
Limited
synchronization
support
*
3
Full support
based on
FieldMate R2.01
specification
*
4
Limited
synchronization
support
*
3 *6
Limited
synchronization
support
*
3 *6 *7
R3.05
R3.10
Limited
synchronization
support
*
3 *6
Limited
synchronization
support
*
3 *6
Limited
synchronization
support
*
3 *6
Full support based
on FieldMate
R2.02/R2.03 /
R2.04
specification
*
5
Limited
synchronization
support
*
7
R3.11 Limited
synchronization
support
*
3 *6
Limited
synchronization
support
*
3 *6
Limited
synchronization
support
*
3 *6
Full support based
on FieldMate
R2.02/R2.03 /R2.04
specification
*
5
Full support
based on
FieldMate R2.05/
R2.06
specification
*
8
*
1: Except e-EDDL data and Device Tag Display Extension Mode
*
2: Handling of e-EDDL Data is limited
*
3: Handling of e-EDDL Data and Device Tag Extension Mode functionalities are limited. Depending on Device
Tag Extension Mode setting, synchronization is not functional.
*
4: Both e-EDDL Data and Device Tag Extension Mode except Long Tag are fully supported by PRM
Synchronization tool
*
5: Both e-EDDL Data and Device Tag Extension Mode including Long Tag are fully supported by PRM
Synchronization tool
*
6: When Long Tag is specified, synchronization is not functional.
*7: AXF Verification data is not supported.
*8: e-EDDL data, Device Tag Extension Mode including Long Tag and AXF Verification data are fully
supported.
Bold line is recommended version combination between PRM and FieldMate.
8th Edition : May 31, 2013-00