Yokogawa FieldMate User Manual
Page 29
<5 LAUNCHING>
5-3
IM 01R01A11-01EN
2) “General Information” is displayed. See Figure 5.1.3.
Enter each field and click “Next (8)”.
Figure 6.1.1 is displayed automatically.
1
2
3
4
5
6
7
8
F050103.ai
Figure 5.1.3 “General Information” Dialog
Table 5.1.2 “General Information” Dialog
Item
No.
Item Name
Description
1
User Name (*)
Enter the user name.
The user name of FieldMate is displayed by default. This field can be
edited.
2
Location. (*)
Enter the user location.
3
Verified by (*)
Enter the name of the person to operate the verification.
4
Tag (Converter)
Enter the tag number of the converter. The value of HART parameter
“Tag” is displayed by default. This field can be edited.
Even if a different value is input from the HART parameter, the HART
parameter is not overwritten.
5
Tag (Flowtube)
Enter the tag number of the flowtube.
6
Serial No. (Converter)
Enter the serial number of the converter.
7
Serial No. (Flowtube)
Enter the serial number of the flowtube.
8
Next
Moves to “Main Screen”. See Chapter 6.
Is enabled only after the mandatory fields have been filled in.
Click “Next” to move to “Main Screen”.
*: Mandatory field