Yokogawa FieldMate - Manual (Page 76)

<7 VARIATION OF VERIFICATION DATA>
7-2
IM 01R01A11-01EN
7.2 Locked Data
“Locked data” is saved as read-only. The icon in Data Status is “ ”.
After verification data is saved as “Locked data”, the data:
• can be loaded.
• can be printed out.
• cannot be over-written.
When verification is complete, save the verification data as “Locked data” to prevent unexpected
over-writing or falsifying, before printing. (Recommended)
7.3 Others
Verification data which is neither “Installation data” nor “Locked data” can be edited. When verifi-
cation is to be continued later, do not save as either “Installation data” or “Locked data”.