Yokogawa PK200 - Manual (Page 6)

IM 21B03D01-01E 1-1
1. HANDLING PRECAUTIONS
1. HANDLING PRECAUTIONS
IMPORTANT
For installation, wiring and maintenance in
hazadous areas, please follow 1.5 Installation of
Intrinsically Safe Type, 1.6 Installation of Flame-
proof Type and “Installation and Operating
Precautions for TIIS Flameproof Equipment” at
the end of this manual
The PK200 current-to-pneumatic converter is fully
factory inspected before shipment. When the instru-
ment is delivered, visually check the instrument and
accessories to ensure that they are not damaged. This
chapter describes the handling precautions, read them
carefully before using the instrument.
For items other than those described in this chapter, see
the relevant items.
If you wish to make inquiry, contact the distributor
where you purchased the instrument or the nearest
YOKOGAWA service station.
1.1 Checking the Model Suffix
Code and Specifications
The data plate on the side face of the instrument base
shows the model suffix code and specifications. With
reference to the model suffix code and specifications in
section 2.3, confirm that the instrument is as specified
by the order.
For inquiry, inform us of the model suffix code and
instrument serial number.
Figure 1.1 Data Plate for General-Use Type
Figure 1.2 Data Plate for CSA Intrinsically Safe Type
Figure 1.3 Data Plate for FM Explosionproof Type
1.2 Transportation Precautions
To prevent damage occurring during transportation,
transport the converter in the original shipping con-
tainer (box) with all packing items and equipment in its
proper position.